Articles

Measuring Tips, Tricks, and Info

Measuring Tips, Tricks, and Info

Download Document

The majority of unsuccessful dog wheelchair fittings are the results of poor measurements. If possible, ask a friend to assist you when measuring your pet. Ideally the measurements are taken with the animal standing rather than laying on his/her side. At least one person should assist when taking measurements for a small animal or two people for a larger animal.

Watch a short video to see how easy it is to measure your pet:

 

Recommended Measuring Materials:

  1. Cloth measuring tape (commonly found in fabric stores) or other flexible measuring tape
  2. 2 yardsticks or other similar rigid sticks
Measuring Chart

Front Height – Measurement "1"
  • Person 1 – rest yardstick level on shoulders
  • Person 2 – stretch measuring tape from level yardstick to ground
  • Enter front height as “ 1” on form
Rear Height – Measurement "2"
  • Person 1 – rest yardstick level over pelvis/hips
  • Person 2 - Stretch measuring tape from level stick to ground
  • Enter rear height as “2” on form
Length – Measurement "3"
  • Stretch measuring tape between collar and tail attachment
  • Enter length as “3” on form
Girth or Chest circumference -
Measurement "4"
  • Wrap measuring tape entirely around chest behind elbows
  • Enter chest girth as “4” on form
Girth Height– Measurement "5"
  • Person 1 – hold animal in standing position
  • Person 2 – stretch tape from bottom of chest just behind front legs to floor
  • Enter as "5" on form
Front Width – Measurement "6"
  • Person 1 – place each yardstick vertically resting on floor and pressing against outside of each shoulder
  • Person 2 – tension measuring tape between vertical yardsticks and measure distance between yardsticks
  • Enter front width as “F” on form
Rear Width – Measurement "7" (similar to “6” except use pelvis/hips)
  • Person 1 – place yardstick vertically resting on floor and pressing against each side of pelvis/hips
  • Person 2 – tension measuring tape and measure distance between vertical yardsticks
  • Enter rear width as “7” on form
Groin height – Measurement "8"
  • Important - Establishes height at which animal will be supported
  • Press one end of tape in groin area and tension tape to floor
  • Enter groin height as “8” on form
Thigh circumference -
Measurement "9"
  • Wrap measuring tape entirely around top of thigh
  • Enter chest girth as “9” on form

IMPORTANT:
If measuring animal on its side use bottom of footpads with leg in a standing position as floor distance. Do NOT stretch leg straight.